Low Price Warrantied inventory at competitive prices
Find it fast Search the world's largest inventory of electronic components by manufacturer, category or part number
Quality guaranteed We sell only warrantied and traceable parts
Get it fast All inventory ready to ship from our sellersMfg Part Number: 751-6099
Alternate P/N: 7516099
NSN : 5905-00-864-5535
NIIN : 008645535
CAGE Code : 19176
Manufacturer: Servo Instrument Corporation
Item Name : Resistor Variable Wire Wound Pre
FSC : FSC 5905 Resistors
If you’re in need of NSN parts, Purchasing Synergy is the ultimate source. As an ASAP Semiconductor company, we have access to a vast and diverse inventory of parts and components like 751-6099 for the aerospace, civil aviation, defense, electronics, and industrial markets. This includes parts such as Resistor Variable Wire Wound Pre from Servo Instrument Corporation with Cage Code 19176 as well as part numbers like 751-6099 and FSC 5905 Resistors with008645535. Purchasing Synergy has more than two billion new and obsolete parts readily available with short lead times and competitive prices and, as we are an AS9120B, ISO 9001:2015, and FAA AC 00-56B accredited business, and the only independent distributor with a No China Sourcing Pledge, each part we sell is fully traceable or comes directly from the manufacturer.
Our website offers a range of parametric search capabilities which allow our customers to search for parts through a number like 751-6099 and filters, one of which is National Stock Number, or NSN. A National Stock Number is an identifier applied to any item of supply that is repeatedly procured, stocked, stored, issued, and used throughout the federal supply system. Purchasing Synergy has a broad selection of NSN parts such as 5905008645535 from manufacturers like Servo Instrument Corporation. To begin the purchasing process immediately, submit an RFQ today.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 0.7495 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABWV | SHAFT DIAMETER | 0.1246 INCHES MINIMUM AND 0.1248 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.920 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 0.8700 INCHES MINIMUM AND 0.8800 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | 0.10 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.10 INCH-OUNCES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.002 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.086 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 4 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING AND THREADED HOLE |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 80.0 SINGLE SECTION AND 170.0 SINGLE SECTION AND 260.0 SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.50/+0.50 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 3 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -5.0/+5.0 DEG ANGULAR ROTATION SINGLE SECTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 89954-892C796 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAW |
| TTQY | TERMINAL TYPE AND QUANTITY | 6 SOLDER STUD |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| ABPM | BODY DIAMETER | 0.870 INCHES MINIMUM AND 0.880 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 90.0 |
| ADAQ | BODY LENGTH | 0.666 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 0.560 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 350.0 NOMINAL |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.0007 INCHES |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 38.88 KILOHMS SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 105.0 SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -1.0/+1.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
 |
“We Proudly Support Intrepid Fallen Heroes Fund that serves United States Military Personal experiencing the Invisible Wounds of War : Traumatic Brain Injury (TBI) and Post Traumatic Stress (PTS). Please visit website (www.fallenheroesfund.org) and help in their valiant effort”. |
We Hope that You Will Visit Us Again the Next Time You Need NSN Parts and Make Us Your Strategic Purchasing Partner.
Request for Quote
